SINGLE SIDED TEGO PLYWOOD – ONE SIDED FILMFACED PLYWOOD
1. Single-sided film-coated plywood
Single-sided film-coated plywood is a product that has the same structure and properties as the common double-sided film-coated plywood on the market, only different in the final finishing stage, instead of laminate film on both sides of the boards, this type only needs to film one side of the board.
2. Single-sided film-coated plywood – Advantages and disadvantages compared to double-sided film-coated plywood
Single-sided film-coated plywood – Advantages:
– The price is significantly lower than the double-sided film-coated plywood, saving you a lot of capitals if used in large volumes.
– The number of reuse times is almost equivalent to double-sided film-coated plywood.
– Very suitable for construction projects with a low number of reuses of film-faced plywood.
– Very popular in foreign markets (Malaysia, Singapore,…) because of its convenience and reasonable investment costs.
– Mechanical, physical and chemical features are equivalent to plywood with double-sided film coating.
Single-sided film-coated plywood – disadvantages:
– Still small volumes in domestic customers.
– Aesthetics are not as good as double-sided film-coated plywood.
– Thin boards 11-12mm thick are easier to warp than double-sided film-coated plywood of the same thickness.
3. Single-sided film-coated plywood – Classification
3.1 Classification of film-coated plywood by film surface characteristics: similar to double-sided film-coated plywood
3.2 Classification of film-coated plywood by thickness and size: similar to double-sided film-coated plywood
3.3 Classification of film-coated plywood by quality: similar to double-sided film-coated plywood
3.4 Classification according to characteristics of the remaining surface of one-sided film-coated plywood panels:
– The back is raw: this is the most popular single-sided film-coated plywood on the market due to its cheapest price.
– Beautiful scrub back: single-sided film-coated plywood is more aesthetically pleasing than the rough back, but the cost is also higher than the rough back. In terms of features used for construction formwork purposes, there is no superiority compared to the rough back type, even a bit less effective because the back surface is thinner, so it is easy to peel. layer of wood behind.
– The back is glued with a layer of faceboard: this single-sided film-coated plywood has very high aesthetics because the back surface is glued with beautiful layers of faceboard, reducing the warping of the board when shrinking due to temperature and moisture content compared to the above two types, but the cost is very high, even close to or higher than the double-sided film-coated plywood if a good, beautiful faceboard is used. Regarding the features used for the purpose of making construction formwork, there is no superior point compared to the above two types.
You can be sourcing Single Sided Tego Plywood in Phu Cau Plywood manufacture in Vietnam where you also will find other suitable plywood such as Tego plywood – Calibrated Commercial Plywood– filmfaced plywood – Matply – Core Veneers … which you need, please contact us, we speak you language.
—Thank You—
